Troubleshoot Your Train

Choose from the following:

Lubrication Remote Signal Power Supply Tender Harness Operational Anomalies Triggering PFA and Other Features Slow Speeds and Speed Control Smoke Unit Switch

Original Proto-Sound General Troubleshooting

Choose from the following:

Once in PFA, the engine never goes in reverse The PFA feature does not begin after stopping the engine The PFA sound effects occasionally repeat themselves When the engine enters PFA event 5, the bell automatically comes on Whenever PFA is enabled, pressing the buttons has no effect I can't get FYS to begin when the engine is stopped in the neutral position Once in FYS, the engine never goes in reverse The FYS feature does not begin even after stopping the engine The FYS sound effects occasionally repeat themselves When the engine enters FYS event 5, the bell automatically comes on. Whenever FYS is enabled, pressing the buttons has no effect. The sounds seem distorted, especially when the whistle or bell is activated When I try to run the engine, the steam volume is OFF or very low When I try to set the Steam Volume on 0 Volume, I still hear the neutral sounds When I try to set the steam volume, it resets itself to the original volume Reminder: I can't get the engine to run after I power up the transformer. The engine won't lock out into Forward, Neutral or Reverse When I first turn the power on, the engine will not begin to run. The engine goes back into RESET instead of Forward I can't get the coupler to arm or fire open when I press the whistle button Only one coupler will function when I press the whistle button The ProtoCoupler won't let the engine uncouple on the "fly" I can't get the bell to ring when I press the whistle button The bell won't work with a separate bell button When I press the whistle button to activate the bell, the whistle sounds When I press the whistle button to activate the bell, I arm the coupler When I press the whistle button to activate the bell, the bell only rings once I can't get the horn to blow when I press the whistle button The horn seems distorted at low voltages When I press the whistle button, the bell comes on instead I can't get the whistle to blow when I press the whistle button The WHISTLE seems distorted at low voltages When I press the whistle button, the bell comes on instead A repeating whistle blast occurs after the power has been shut down After I turn off my transformer, my engine continues to make sounds I get no sounds when the engine shifts between the direction states I hit the brake sound and stopped, but the engine makes p. station sounds I hit the brake in neutral after it was in forward, but the brake sounds didnt play The brake sounds continue to play even after the engine stops When the transformer is throttled down, the sounds won't play My original Proto-Sound locomotive makes three clanking sounds when powered up.